- Head Office 0238 081 7160
- London 0203 376 1179
- Manchester 0161 507 6586
- sales@rglservices.co.uk
RGL Services delivers pipeline cleaning and blockage removal across the UK using ultra high-pressure water jetting at up to 2,800 bar. Operating since 1984, we remove heavy scale, deposits and stubborn blockages from industrial pipework to restore the original internal diameter and full flow, with no chemicals, no abrasives and no need for pipe
replacement. We deploy specialist nozzles, rotating heads and custom rigs for long runs, complex bends and hard-to-reach sections.
As specialist pipeline cleaning contractors, we combine high-pressure and ultra-high pressure water-only techniques under one contractor, for emergency blockages and scheduled maintenance alike. Rentajet is mobilised nationwide, with Romsey, London and Manchester coverage and a direct response service for restricted-flow and blocked pipework
Over time, industrial pipelines accumulate heavy scale, deposits and stubborn blockages that restrict product flow, reduce efficiency and raise energy consumption. Left untreated, the build-up can force costly downtime and, in the worst case, full pipe replacement. Chemical cleaning and mechanical scraping are the usual alternatives, but they are often slow, environmentally damaging and risky to pipe integrity.
Ultra-high-pressure water jetting at 2,800 bar removes even the toughest scale, sludge and solid deposits using water only, restoring pipework to its original internal diameter and full flow capacity. There are no chemicals to handle or neutralise, no abrasives, and no invasive replacement. Specialist nozzles, rotating heads and custom rigs are matched to the pipe run, including long lengths, complex bends and hard-to-reach sections.
That combination is what gets UHP pipeline cleaning specified on process pipework where flow, efficiency and pipe integrity all have to be protected without resorting to chemicals or replacement.
Rentajet operates a full range of industrial pipeline cleaning services configured to the pipe, the deposit and the access on site.
Pipe descaling and removal of hard scale, sludge and process deposits from internal pipe walls using UHP rotating heads, restoring the original bore and flow capacity.
Pipeline blockage removal of solid blockages and obstructions restricting flow, returning the pipeline to full capacity without excavation or replacement.
Cleaning of long pipeline runs using configured nozzles and feed systems that maintain cutting power along the full length.
Cleaning through complex bends, reducers and fittings using rotating heads and flexible lances matched to the pipe geometry.
Rapid-response clearance of an unexpected blockage that is restricting or stopping flow on
critical process pipework.
Engineered nozzles, rotating heads and custom rigs designed for the exact challenges of a specific pipeline system.
UHP pipeline blockage removal changes the flow, cost and environmental profile of pipe maintenance compared with chemical and mechanical methods.
Returns the pipe to its original bore and flow capacity, recovering process efficiency.
Uses only high-pressure or ultra-high-pressure water, with nothing to neutralise or dispose of.
clears hard scale, sludge and solid deposits that defeat chemical and mechanical cleaning.
Restores existing pipework rather than cutting it out and replacing it.
The same method clears urgent blockages and runs planned maintenance programmes.
Fast cleaning shortens the off-line window and protects production.
Chemical cleaning and mechanical scraping remain common where specialist water jetting is not available. They are familiar but are often slow, generate chemical or contaminated waste, and can risk pipe integrity. UHP water jetting carries an equipment day rate but removes the chemical burden and the integrity risk, which on most pipework scopes makes it the lower total cost route.
| Factor | UHP Water Jetting | Chemical / Mechanical Cleaning |
|---|---|---|
| Hard scale and deposit removal | Complete, restores full bore | Often partial |
| Chemicals used | None, water only | Often required, with neutralising |
| Pipe integrity risk | None, no abrasion | Possible damage from scraping |
| Restores original diameter | Yes | Limited |
| Waste handling | Contained wastewater | Chemical or contaminated waste |
| Long runs and complex bends | Yes, configured tooling | Limited by reach |
| Avoids pipe replacement | Yes | Sometimes replacement needed |
| Downtime | Reduced | Extended by dwell or scraping |
UHP pipeline cleaning is specified wherever scale, deposits or blockages are restricting flow in industrial pipework. Rentajet delivers across three primary application sectors.
Cleaning of process and transfer pipework on refineries and chemical plants, removing scale and deposits to restore flow and efficiency.
Cleaning of process pipework in food, pharmaceutical and manufacturing plants where flow and hygiene depend on a clean bore.
Cleaning of cooling, effluent and service pipework on utility and industrial sites where deposits restrict flow and raise energy use.
Rentajet delivers process pipework cleaning to UK operators across the sectors most reliant on uninterrupted flow.
Process and transfer pipework cleaning on refineries, terminals and chemical plants, including emergency blockage clearance.
Cleaning of process lines between campaigns where deposits affect flow, batch quality and changeover time.
Hygienic pipework cleaning in food and beverage production, restoring bore and flow without chemical agents.
Process pipework cleaning to support validation, changeovers and reliable flow in pharmaceutical and fine chemical plants.
Cooling, effluent and service pipework cleaning on power and utility sites during outages and maintenance.
Cleaning and descaling of process and transfer pipework on water and effluent treatment sites.
RGL Services has been delivering water jetting services to UK heavy industry since 1984 and deploys a wide range of specialist nozzles, rotating heads and custom rigs tailored to the exact challenges of each pipeline system, from long runs to complex bends and hard-to reach sections.
Pipeline cleaning sits inside a wider water jetting capability that includes heat exchanger and tube bundle cleaning, no dig blockage removal and tank, vessel and column cleaning, which means pipeline teams arrive with the full scope of supporting services on the same mobilisation.
• Forty years of UHP water jetting experience: established 1984, with delivery across UK refineries, chemical plants and process sites.
• Configured nozzles and custom rigs: tooling matched to pipe diameter, length and geometry, including long runs and complex bends.
• ISO 9001, ISO 14001 and ISO 45001 registered: Water Jetting Association membership and full adherence to the WJA Code of Practice.
• Emergency and scheduled capability: rapid blockage response and planned maintenance programmes under one contractor.
• UK-wide mobilisation: Romsey HQ with London and Manchester support, and a direct response service for restricted-flow pipework.
The result is a contractor that operations, maintenance and reliability leads can specify with confidence on pipeline scopes where flow, efficiency and pipe integrity all matter
Rentajet follows a five-step process on every enquiry through to flow restoration.
We survey the pipeline, the deposit or blockage, the diameter, length and access, and confirm the cleaning method and tooling. A method statement and risk assessment are produced covering water management and WJA Code of Practice compliance.
UHP pumps, nozzles, rotating heads and recovery plant are mobilised to site. Pump units run at up to 2,800 bar, with all hoses and connections inspected under WJA Code of Practice.
Nozzles and heads are configured to the pipe diameter, geometry and deposit. Pressure and feed are set and confirmed on a section before the full run is cleaned.
Rotating heads and nozzles clean the internal bore along the run while wastewater and debris are contained and recovered. Flow restoration is checked against the specification.
The cleaned pipeline is verified for restored bore and flow, a record is issued, and the line is handed back ready to return to service.
Cost depends on the pipe diameter and length, the deposit or blockage, the geometry and the access. UHP water jetting carries an equipment day rate but typically costs far less than pipe replacement and avoids the downtime that restricted flow causes. Contact us for a project-specific quotation.
No. UHP water jetting removes scale and deposits through water pressure without the abrasion or scoring that mechanical scraping can cause. Pressure and tooling are matched to the pipe and confirmed on a section before the full run is cleaned.
Yes. Removing scale and deposits from the internal walls returns the pipe to its original bore and full flow capacity, which is one of the main reasons UHP cleaning is specified over chemical methods that only partially clear the build-up.
Yes. We deploy configured nozzles, rotating heads and custom rigs matched to long runs, complex bends, reducers and hard-to-reach sections. The survey confirms the geometry and the right tooling.
Yes. We provide rapid response for unexpected blockages restricting or stopping flow on critical process pipework, as well as scheduled maintenance cleaning under planned
programmes.
